TA9 Titanium Rod (High Corrosion Resistance) TA10 Titanium Rod Supports Zero Cutting

TA9 titanium-palladium alloys include Ti-0.2Pd, Ti-0.15Pd, and Ti-0.13Pd, among which Ti-0.2Pd is more widely used in reactors, towers, autoclaves, heat exchangers, pumps, valves, centrifuges, separators, pipelines, fittings, and electrolytic cells for various highly corrosive environments.

Main components: titanium (Ti) balance, 0.12 ≤ palladium (Pd) ≤ 0.25. Nitrogen (N) ≤ 0.03, carbon (C) ≤ 0.08, hydrogen (H) ≤ 0.013, iron (Fe) ≤ 0.250, oxygen (O) ≤ 0.15

TA10 titanium bar (titanium-molybdenum-nickel alloy) has a nominal composition of Ti-0.3Mo-0.8Ni. It is the Ti-12 alloy developed by the United States in the mid-1970s and is a titanium alloy resistant to crevice corrosion. TA10 titanium-molybdenum-nickel bars have higher tensile strength than pure titanium TA2 but lower strength than TC4. TA10 titanium bars are available in stock, and their processing techniques are essentially the same as those for pure titanium. This alloy has twice the tensile strength of pure titanium at 300 degrees Celsius, significantly improved corrosion resistance in reducing media, and does not suffer crevice corrosion in chlorides at 150-200 degrees Celsius.

Grade: TA9, TA10

Execution standards: ASTMB348, GB/T2965-07

Physical properties: density 4.51 g/cm³, grain size 6.0-7.0

Mechanical properties: tensile strength: 270 MPa ≥ σb ≤ 410 MPa, yield strength σb ≥ 165 MPa, elongation: δ ≥ 27%

Production status: hot worked (R), cold worked (Y), annealed (M), solution treated